Asus RAMPAGE V EDITION 10 - 3.9 Tool Menu; 3.9.1 GPU Post; 3.9.2 ASUS EZ Flash 3 Utility

3-28
Chapter 3: BIOS Setup
Chapter 3
Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
• To access Windows
®
OS in Safe Mode, press <F8> after POST (Windows
®
8 not
supported).
• To select the boot device during system startup, press <F8> when the ASUS Logo
appears.
Boot Override
These items displays the available devices. The number of device items that appears on
the screen depends on the number of devices installed in the system. Click an item to start
booting from the selected device.
3.9 Tool menu
The Tools menu items allow you to congure options for special functions. Select an item
then press <Enter> to display the submenu.
3.9.1 GPU Post
This item shows the installed graphics cards in the motherboard. It also suggests the
conguration of graphic cards in the motherboard for the best performance.
3.9.2 ASUS EZ Flash 3 Utility
Allows you to run ASUS EZ Flash 3. When you press <Enter>, a conrmation message
appears. Use the Left/Right arrow key to select between [via Storage Devices(s)] or [via
Internet], then press <Enter> to conrm your choice.
For more details, refer to section 3.11.2 ASUS EZ Flash 3 utility.
Setup Animator
This item allows you to enable or disable Setup Animator.
Conguration options: [Enabled] [Disabled]