EasyManua.ls Logo

Asus RAMPAGE V EDITION 10 - Supremefx Hi-Fi Specifications Summary

Asus RAMPAGE V EDITION 10
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xv
SupremeFX Hi-Fi specifications summary
Hardware
1 x ESS ES9018K2M SABRE DAC
2 x LM4562 Op amps
1 x TPA6120A2 Headphone amp
1 x Cirrus Logic CS5361
5 x RC4580 Op amps
Headphone Output
Performance
Supported formats: Up to 32-bit/384kHz and DSD 64/128*
Output (32Ohms): 4.8VRMS (720mW RMS per channel)
Output (600Ohms): 6.8VRMS (77mW RMS per channel)
THD+N @ 1K (-3dB): -104dB (<0.0007%)
Signal to Noise Ratio (A-weighted): -121.1dB
Crosstalk: -98dB
* Sample rates greater than 32-bit/96kHz are only supported when high
speed mode is enabled.
Rear I/O Ports
POWER : 1 x 6-pin PCIe power connector
SIGNAL : 1 x USB 2.0 header
Front I/O Ports
1 x Volume control knob
1 x 6.3mm headphone jack*
1 x 3.5mm headphone jack*
1 x 3.5mm mic/line in jack
* Only one of these jacks will be active at a given time
Dimensions
5.25” ODD drive bay Form Factor (14.5 x 4.2x 14cm [W x H x D])*
* The face of this device is designed to be flush with a standard drive bay
with the knob extending 1cm

Table of Contents

Other manuals for Asus RAMPAGE V EDITION 10

Related product manuals