Asus RAMPAGE V EDITION 10 - 3.11.3 ASUS CrashFree BIOS 3

ASUS RAMPAGE V EDITION 10
3-35
Chapter 3
3.11.3 ASUS CrashFree BIOS 3
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the
BIOS le when it fails or gets corrupted during the updating process. You can restore a
corrupted BIOS le using the motherboard support USB drive that contains the BIOS le.
The BIOS le in the motherboard support USB drive may be older than the BIOS le
published on the ASUS ofcial website. If you want to use the newer BIOS le, download
the le at https://www.asus.com/support/ and save it to a USB ash drive.
Recovering the BIOS
To recover the BIOS:
1. Turn on the system.
2. Insert the motherboard support USB drive, or a USB ash drive containing the BIOS
le to the USB port.
3. The utility automatically checks the devices for the BIOS le. When found, the utility
reads the BIOS le and enters the ASUS EZ Flash 3 Utility automatically.
4. The system requires you to enter BIOS Setup to recover the BIOS setting. To ensure
system compatibility and stability, we recommend that you press <F5> to load default
BIOS values.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!