Asus RAMPAGE V EDITION 10 - Page 46

1-28
Chapter 1: Product Introduction
Chapter 1
YoucanconnectthefrontpanelUSBcabletotheASUSQ-Connector(USB)rst,andthen
installtheQ-Connector(USB)totheUSBconnectoronboardifyourchassissupportsfront
panelUSBports.
DONOTconnecta1394cabletotheUSBconnectors.Doingsowilldamagethe
motherboard!
5. USB 2.0 connectors (10-1 pin USB1112; USB1314)
TheseconnectorsareforUSB2.0ports.ConnecttheUSBmodulecabletoanyof
theseconnectors,theninstallthemoduletoaslotopeningatthebackofthesystem
chassis.TheseUSBconnectorscomplywithUSB2.0specicationthatsupportupto
480Mb/sconnectionspeed.
• TheUSB2.0moduleispurchasedseparately.
• 1xUSB2.0port(USB1112)atmid-boardshareswithROGextension(ROG_EXT)
port.