Asus RAMPAGE V EDITION 10 - Page 48

1-30
Chapter 1: Product Introduction
Chapter 1
8. Front panel audio connector (10-1 pin AAFP)
Thisconnectorisforachassis-mountedfrontpanelaudioI/Omodulethatsupportseither
HDAudioorlegacyAC’97audiostandard.ConnectoneendofthefrontpanelaudioI/O
module cable to this connector.
• Werecommendthatyouconnectahigh-denitionfrontpanelaudiomoduletothis
connectortotakeadvantageofthemotherboard’shigh-denitionaudiocapability.
• Ifyouwanttoconnectahigh-denitionoranAC’97frontpanelaudiomoduletothis
connector,settheFrontPanelTypeitemintheBIOSsetupto[HD] or [AC97].
9. M.2 (SOCKET3)
TheM.2(Socket3)withMKeysupportstype2260(22mmx60mm),2280(22mmx
80mm),and22110(22mmx110mm)PCIeinterfacestoragedevices.
• ThePCIEX8_4slotsharesbandwidthwithM.2andU.2.
• TheM.2(NGFF)SSDmoduleispurchasedseparately.