Asus RAMPAGE V EDITION 10 - Page 51

ASUS RAMPAGE V EDITION 10
1-33
Chapter 1
12. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V_1; 4-pin EATX12V_2;
4-pin EZ_PLUG)
TheseconnectorsareforATXpowersupplyplugs.Thepowersupplyplugsare
designedtottheseconnectorsinonlyoneorientation.Findtheproperorientationand
pushdownrmlyuntiltheconnectorscompletelyt.
• Forafullyconguredsystem,werecommendthatyouuseapowersupplyunit
(PSU)thatcomplieswithATX12VSpecication2.0(orlaterversion)andprovidesa
minimumpowerof450W.
• Donotforgettoconnectthe4-pin/8-pinEATX12Vpowerplug;otherwise,thesystem
will not boot.
• Connectthe4-pinEZ_PLUGpowerplugstoensuresufcientpowerwhenyouinstall
multiple graphics cards.
• UseofaPSUwithhigherpoweroutputisrecommendedwhenconguringasystem
withmorepower-consumingdevices.Thesystemmaybecomeunstableormaynot
bootupifthepowerisinadequate.
• Ifyouwanttousetwoormorehigh-endPCIExpressx16cards,useaPSUwithat
least1000Wofoutputpowertoensuresystemstability.