62
English
English
USB BIOS Flashback
The USB BIOS Flashback allows user to update the BIOS without entering the BIOS or the
operating system by using a USB ash disk drive.
• This function supports USB ash disks formatted using FAT 32/16 on a
single partition.
• Disable ErP READY in the BIOS before using the USB BIOS Flashback
feature via the ROG Connect port.
1. Download the latest BIOS le from the
ASUS website.
2. Extract and rename the BIOS image le
to “CG8890.CAP”.
3. Copy
“CG8890.CAP” to the root
directory of the USB ash disk drive.
4. Turn off the system and connect the
USB ash drive to the ROG Connect
port (the white USB 2.0 port) at the rear
panel of the motherboard.
5. Hold the ROG Connect button
until the
LED begins to blink, then release the
button.
6. Wait until the LED stops blinking,
indicating that the BIOS update process is
complete.
• DO NOT unplug the power while updating the BIOS to prevent system boot
failure.
To Next Page
Loading...
