24
ROG GR8
Connecting Intel® WiDi-supported devices
1. Turn on your ROG GR8.
2. Press the Miracast Receiver button.
NOTE: The LED on the Miracast Receiver button lights up and turns to
red to indicate that the Miracast Receiver function is enabled.
3. Launch Intel WiDi from your device.
4. From the Detected Adapters window, select the ROG GR8’s
SSID then click Connect.
5. Key-in the WPS PIN shown on your TV display then click Next.
6. If connection is successfully made, the TV display is mirrored on
ROG GR8 display.
To Next Page
Loading...
