EasyManuals Logo

Asus ROG MAXIMUS XII APEX User Manual

Asus ROG MAXIMUS XII APEX
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
1-6
Chapter 1: Product Introduction
Chapter 1
Memory configurations
You may install 4 GB, 8 GB, 16 GB, and 32 GB unbuffered and non-ECC DDR4 DIMMs into
the DIMM sockets.
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
For system stability, use a more efficient memory cooling system to support a full
memory load or overclocking condition.
Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory
modules.
Double Capacity DRAM support depends oh the DRAM Models.
Visit the ASUS website for the latest QVL.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus ROG MAXIMUS XII APEX and is the answer not in the manual?

Asus ROG MAXIMUS XII APEX Specifications

General IconGeneral
BrandAsus
ModelROG MAXIMUS XII APEX
CategoryMotherboard
LanguageEnglish

Related product manuals