1-32
Chapter 1: Product Introduction
Chapter 1
34. Condensation detection LEDs
The Condensation detection LEDs will light up when water condensation is detected
on the corresponding critical key components (CPU, DRAM, and PCIE). This user-
friendly design helps you quickly identify possible damages caused by condensation.
The Q LEDs provide the most probable cause of an error code as a starting point for
troubleshooting. The actual cause may vary from case to case.
35. Storage Device Activity LED
The Storage Device Activity LED lights up or blinks when data is read from or written
to the storage device or storage device add-on card.
To Next Page
Loading...
