EasyManua.ls Logo

Asus ROG RAMPAGE VI EXTREME - Internal and External Connectors

Asus ROG RAMPAGE VI EXTREME
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xi
ROG RAMPAGE VI EXTREME specifications summary
(continued on the next page)
Internal I/O
connectors
1 x 4-pin VROC key
1 x USB 3.1 Gen 2 front panel connector
2 x USB 3.1 Gen 1 connectors support additional 4 USB 3.1 Gen 1 ports
1 x USB connector supports 2 USB 2.0 ports
[one connector via ROG_EXT header]
6 x SATA 6Gb/s connectors
1 x U.2 port
1 x M.2 PCIe 3.0 x4 Socket 3 with M Key, type 2242/2260/2280 (supports
PCIe3.0 x 4 and SATA modes)
1 x ROG extension (ROG_EXT) header
1 x 4-Pin CPU_FAN connector
1 x 4-Pin CPU_OPT fan connector
1 x 4-Pin H_AMP fan connector
3 x 4-Pin CHA_FAN connectors
1 x 4-pin W_PUMP+1 connector
1 x 4-pin W_PUMP+2 connector
1 x 2-pin W_IN connector
1 x 2-pin W_OUT connector
1 x 3-pin W_FLOW connector
1 x 9-pin WB_SENSOR connector
1 x 5-pin EXT_FAN (Extension Fan) connector
2 x 2-pin T_SENSOR connectors
1 x 24-pin EATX power connector
1 x 8-pin EATX 12V power connector
1 x 4-pin EATX 12V power connector
1 x EZ Plug connector
11 x ProbeIt Measurement Points
1 x START button
1 x Reset button
1 x Safe Boot button
1 x ReTry button
1 x LN2 mode jumper
1 x Slow mode switch
1 x PCIe x16 lane switch
1 x MemOK! button
1 x BIOS Switch button
1 x System panel connector
1 x AURA addressable header
2 x AURA RGB strip headers
1 x TPM connector
1 x Front panel audio connector (AAFP)
1 x Thunderbolt header

Table of Contents

Related product manuals