Asus ROG RAMPAGE VI EXTREME - Wi-Fi Antenna Installation

ROG RAMPAGE VI EXTREME
2-15
Chapter 2
2.1.11 Wi-Fi antenna installation
Installing the ASUS 2x2 dual band W-Fi and ASUS Wi-Fi 802.11ad(WiGig) antenna
ConnectthebundledASUS2x2dualbandWi-FiantennaconnectortothetoptwoWi-Fiports
atthebackofthechassis,thenconnecttheWi-Fi802.11ad(WiGig)antennatothebottom
Wi-Fi port.
• EnsurethattheASUS2x2dualbandW-FiandASUSWi-Fi802.11ad(WiGig)antenna
is securely installed to the Wi-Fi ports.
• Ensurethattheantennaisatleast20cmawayfromallpersons.
• Wi-Fi802.11ad(WiGig)isonlyavailableincertiedcountries.
• Foroptimumperformance,ensurethattheASUS2x2dualbandW-Fiantennaisat
least10cmawayfromtheASUSWi-Fi802.11ad(WiGig)antenna.
The illustration above is for reference only. The I/O port layout may vary with models, but
the Wi-Fi antenna installation procedure is the same for all models.
ASUS Wi-Fi 802.11ad(WiGig) antenna
ASUS 2x2 dual band W-Fi antenna