Asus ROG RAMPAGE VI EXTREME - Page 37

ROG RAMPAGE VI EXTREME
1-21
Chapter 1
5. USB 2.0 connector (10-1 pin USB1314)
ThisconnectorisforUSB2.0ports.ConnecttheUSBmodulecabletothisconnector,
theninstallthemoduletoaslotopeningatthebackofthesystemchassis.ThisUSB
connectorcomplieswithUSB2.0specicationthatsupportsupto480Mb/sconnection
speed.
6. Thermal sensor connectors (2-pin T_SENSOR1-2)
Theseconnectorsareforthethermistorcablesthatmonitorthetemperatureofthe
devicesandthecriticalcomponentsinsidethemotherboard.Connectthethermistor
cableandplacethesensoronthedeviceorthemotherboard’scomponenttodetectits
temperature.