2-1
ASUS LCD Monitor XG349C Series
2.1 Detaching the Stand
(for VESA Wall Mount)
• Avoid damaging the monitor surface. While detaching the monitor stand, always
keep the monitor inside its EPS packaging.
The detachable stand of this monitor is specially designed for VESA wall
mount.
1. Disconnect power and signal cables. Carefully put the monitor facedown
on its EPS packaging.
2. Remove the covers on where the monitor and the arm meet.
3. Loosen the four (4) bundled screws securing the arm to the rear of the
monitor.
4. Detach the stand (arm and base) from the monitor.
5. Attach the four screw standoffs to the respective screw holes on the rear
of the monitor.
6. Secure the wall mount bracket to the monitor with the four (4) screws.
To Next Page
Loading...
