3-1ASUS PG258 Series LCD Monitor
3.1 OSD (On-Screen Display) menu
MOVE/ENTER
BACK
EXIT
Blue Light Filter
Color
Image
Input Select
System Setup
Level 0
Level 1
Level 2
Level 3
Level 4
Normal Mode DP 1920x1080@ 240Hz
Racing Mode
ASUS ROG PG258Q
1. Press the ( ) button to activate the OSD menu.
2. Move the
( ) button up/down to navigate through the functions.
Highlight the desired function and press the
( ) button to activate it. If
the function selected has a sub-menu, move the
( ) button up/down
again to navigate through the sub-menu functions. Highlight the desired sub-
menu function and press the
( ) button or move the ( ) button
right to activate it.
3. Move the
( ) button up/down to change the settings of the selected
function.
4. To exit and save the OSD menu, press the
button or move the
(
) left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.
In this function, you can adjust the blue light filter level.
MOVE/ENTER
BACK
EXIT
Blue Light Filter
Color
Image
Input Select
System Setup
Level 0
Level 1
Level 2
Level 3
Level 4
Normal Mode DP 1920x1080@ 240Hz
Racing Mode
ASUS ROG PG258Q
No change.