3-4
Chapter 3: OSD (On-Screen Display) menu
• Square: Provides multiple aspect ratio choices with different
screen sizes, including Full, Equivalent and Pixel by pixel.
The following function(s) will be disabled when this function turns on: Variable
Refresh Rate, PIP/PBP, ELMB.
• Blue Light Filter:
• OFF: No change.
• Level 1~4: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated, the default settings of Racing
Mode will be automatically imported. Between Level 1 to Level
3, the Brightness function is user-congurable. Level 4 is an
optimized setting. The Brightness function is not user-congurable.
The monitor uses low blue light panel and compliance with TÜV Rheinland Low
Blue Light Hardware Solution at factory reset/default setting mode (Brightness:
65%, Contrast: 80%, CCT: 6500K, Preset mode: Racing mode, Power Setting:
YES).
The following function(s) will be disabled when this function turns on: ELMB.
•
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, you should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter reduces 70% (max.) harmful blue
light to avoid CVS (Computer Vision Syndrome).
To Next Page
Loading...
Need help?
General
