Asus SABERTOOTH 990FX - Tool Utilities: TurboV EVO and Sensor Recorder

4-12 Chapter 4: Software support
Chapter 4
4.3.3 Tool
TurboV EVO
ASUS TurboV EVO introduces Manual Mode that allows you to manually adjust the CPU
frequency and related voltages. After installing AI Suite II from the motherboard support DVD,
launch TurboV EVO by clicking Tool > TurboV EVO on the AI Suite II main menu bar.
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software conguration.
Manual Mode
Manual Mode allows you to overclock the BCLK frequency, CPU voltage, IMC voltage, and
DRAM Bus voltage in WIndows
®
environment and takes effect in real-time without exiting and
rebooting the OS.
Refer to the CPU documentation before adjusting CPU voltage settings. Setting a high
voltage may damage the CPU permanently, and setting a low voltage may make the
system unstable.
For system stability, all changes made in TurboV will not be saved to BIOS settings and will
not be kept on the next system boot. Use the Save Prole function to save your customized
overclocking settings and manually load the prole after Windows starts.
For advanced overclock ability, adjust rst the BIOS items, and then proceed more detailed
adjustments in More Settings.
Save the current
settings as a new
prole
Voltage
Adjustment
bars
Current values
Target values
Load prole
Manual Mode
Click to show
/ hide more
settings
Applies all changes
immediately
Undoes all changes
without applying
Click to restore
all start-up
settings