Asus SABERTOOTH 990FX - Ai Tweaker Menu for Performance Tuning

ASUS SABERTOOTH 990FX
3-7
Chapter 3
3.4 Ai Tweaker menu
The Ai Tweaker menu items allow you to congure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect eld
values can cause the system to malfunction.
The conguration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Scroll down to display the following items:
Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc.
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc.
[D.O.C.P.] When DOCP is enabled CPU
Bus frequency, CPU ratio and memory
parameters will be auto optimized.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save ESC: Exit
UEFI BIOS Utility - Advanced Mode
Current CPU Speed : 3426MHz
Target CPU Speed : 3400MHz
Current Memory Frequency : 1066MHz
Current NB Frequency : 3400MHz
Current HT Link Speed : 3400MHz
Ai Overclock Tuner Auto
OC Tuner CANCEL
CPU Ratio Auto
Memory Frequency Auto
CPU/NB Frequency Auto
HT Link Speed Auto
CPU Spread Spectrum Auto
PCIe Spread Spectrum Auto
EPU Power Saving Mode Disabled
> DRAM Timing Control
> DRAM Driving Control
DIGI+ VRM
CPU Load Line Calibration Auto
CPU/NB Load Line Calibration Auto
CPU Current Capability 100%
CPU/NB Current Capability 100%
CPU Power Phase Control Standard
CPU Voltage Frequency Auto
VRM Spread Spectrum Disabled
CPU Power Duty Control T. Probe Th...
CPU & NB Voltage Offset Mode
Offset Mode Sign +
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save ESC: Exit
Min = 0.006250V
Max = 0.793750V
Standard = By CPU
Oncrement = 0.006250V
+/- : Raise/Reduce