Asus SABERTOOTH 990FX - DIGI+ VRM and System Monitoring Configuration

4-14 Chapter 4: Software support
Chapter 4
DIGI+ VRM
ASUS DIGI+ VRM allows you to adjust VRM voltage and frequency modulation to enhance
reliability and stability. It also provides the highest power efciency, generating less heat to
longer component lifespan and minimize power loss.
After installing AI Suite II from the motherboard support DVD, launch DIGI+ VRM by clicking
Tool > DIGI+ VRM on the AI Suite II main menu bar.
Application helps
Configuration items
and options
Apply all changes
immediately
Undo all changes
without applying
CPU Load-line Calibration
Load-line is dened by Intel VRM spec and
affects CPU voltage. The CPU working voltage
will decrease proportionally to CPU loading.
Higher load-line calibration could get higher
voltage and good overclocking performance but
increase the CPU and VRM thermal.
• Regular: 0%
• Medium: 25%
• High: 50%
• Ultra: 75%
• Extreme: 100%
• The actual performance boost may vary depending on your CPU specication.
• Do not remove the thermal module. The thermal conditions should be monitored.
Introduction on DIGI+ VRM Conguration Items