Asus SABERTOOTH 990FX - Page 125

ASUS SABERTOOTH 990FX
4-25
Chapter 4
ASUS MyLogo
ASUS MyLogo allows you to customize the boot logo. The boot logo is the image that
appears on screen during the Power-On Self-Tests (POST). ASUS MyLogo allows you to:
• Change the current BIOS boot logo of your motherboard
• Change the boot logo of a downloaded BIOS le and update this BIOS to your
motherboard
• Change the boot logo of a downloaded BIOS le without updating this BIOS to your
motherboard
Ensure that the BIOS item Full Screen Logo is set to [Enabled] to display the boot logo.
See the section Boot Settings Conguration of the BIOS Setup chapter in the user manual.
Changing the BIOS boot logo
1. From the AI Suite II main menu bar, click Update > MyLogo.
2. Select any of these three options, then
click Next:
• Change the BIOS boot logo of my
motherboard
• Change the boot logo of a
downloaded BIOS le and update
this BIOS to my motherboard
• Change the boot logo of a
downloaded BIOS le (But do
not update this BIOS to my
motherboard)
Before using the last two options, ensure that you download a BIOS le to your computer
using ASUS Update.
3. Locate the picture le that you want to
use as the boot logo (and the downloaded
BIOS if required) and then click Next.