Asus SABERTOOTH 990FX - Page 32

2-14 Chapter 2: Hardware information
Chapter 2
SABERTOOTH 990FX Motherboard Qualied Vendors Lists (QVL)
AM3+ DDR3 2000 MHz capability
Vendors Part No. Size SS/
DS
Chip Brand Chip NO. Timing Voltage DIMM socket support
(Optional)
1 DIMM 2 DIMM 4 DIMM
A-DATA AX3U2000GB2G9B(XMP) 2GB DS - - 9-11-9-27 1.55~1.75 • •
A-DATA
AX3U2000GC4G9B(XMP)
4GB DS
-
- 9-11-9-27
1.55~1.75
•
•
Apacer 78.AAGD5.9KD(XMP) 6GB(3 x 2GB) DS - - 9-9-9-27 - • •
G.SKILL F3-16000CL9D-4GBTD(XMP) 4GB(2 x 2GB) DS - - 9-9-9-24 1.65 • •
G.SKILL F3-16000CL9T-6GBPS(XMP) 6GB(3 x 2GB) DS - - 9-9-9-24 1.65 • •
G.SKILL F3-16000CL9T-6GBTD(XMP) 6GB(3 x 2GB) DS - - 9-9-9-24 1.6 • • •
GEIL GUP34GB2000C9DC(XMP) 4GB ( 2x 2GB ) DS - - 9-9-9-28 1.65 • • •
GEIL
GE38GB2000C9QC(XMP)
8GB(4 x 2GB) DS
-
- 9-9-9-28
1.65 •
•
•
KINGSTON KHX2000C9AD3T1K3/
3GX(XMP)
3GB ( 3x 1GB ) SS - - - 1.65 • • •
KINGSTON KHX2000C9AD3T1K2/
4GX(XMP)
4GB ( 2x 2GB ) DS - - 9 1.65 • • •
KINGSTON KHX2000C9AD3W1K2/
4GX(XMP)
4GB ( 2x 2GB ) DS - - 9 1.65 • •
KINGSTON KHX2000C9D3T1K2/
4GX(XMP)
4GB ( 2x 2GB ) DS - - - 1.65 • •
KINGSTON KHX2000C9AD3T1K3/
6GX(XMP)
6GB ( 3x 2GB ) DS - - 9 1.65 • •
KINGSTON KHX2000C9AD3T1K3/
6GX(XMP)
6GB ( 3x 2GB ) DS - - - 1.65 • • •
Gingle 9CAASS37AZZ01D1 2GB DS - - 9-9-9-24 - • •
Patriot PVT36G2000LLK(XMP) 6GB(3 x 2GB) DS - - 8-8-8-24 1.65 •
Side(s): SS - Single-sided DS - Double-sided
DIMM support:
• 1 DIMM:
Supports one (1) module inserted into any slot as Single-channel memory
conguration
.
•
2 DIMMs:
Supports one pair of modules inserted into either the beige or the brown
slots as one pair of Dual-channel memory conguration.
• 4 DIMMs: Supports four (4) modules inserted into both the beige or the brown slots as
two pairs of Dual-channel memory conguration.
• When installing total memory of 4GB capacity or more, Windows 32-bit operation
system may only recognize less than 3GB. Hence, a total installed memory of less
than 3GB is recommended.
• The default DIMM frequency depends on its Seriel Presence Detect (SPD), which is
the standard way of accessing information from a memory module. Under the default
state, some memory modules for overclocking may operate at a lower frequency than
the vendor-marked value.