Asus SABERTOOTH 990FX - Page 91

ASUS SABERTOOTH 990FX
3-29
Chapter 3
ASUS O.C. Prole
This item allows you to store or load multiple BIOS settings.
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
Save BIOS settings to Prole
Back Tool\ ASUS O.C. Prole >
UEFI BIOS Utility - Advanced Mode
The Setup Prole Status items show Not Installed if no prole is created.
O.C. Prole Conguration
==========================================================
Setup Prole1 Status : Not Installed
Setup Prole2 Status : Not Installed
Setup Prole3 Status : Not Installed
Setup Prole4 Status : Not Installed
Setup Prole5 Status : Not Installed
Setup Prole6 Status : Not Installed
Setup Prole7 Status : Not Installed
Setup Prole8 Status : Not Installed
==========================================================
Add Your CMOS Prole
Label
Save to Prole 1
Load CMOS Prole
Load from Prole 1
• DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
• We recommend that you update the BIOS le only coming from the same memory/
CPU conguration and BIOS version.
Label
Allows you to input the label of setup prole.
Save to Prole
Allows you to save the current BIOS settings to the BIOS Flash, and create a prole. Key in a
prole number from one to eight, press <Enter>, and then select Yes.
Load from Prole
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the prole
number that saved your BIOS settings, press <Enter>, and then select Yes.