Asus SL200 - 3.4.5 PPTP (Piont-to-Piont Tunnel Protocol)

Chapter 3 Router Setup
SL200 User Manual
24
User Name
: Enter the username provided by the ISP.
Password
: Enter the password provided by the ISP.
Please retype your Password
: Retype the password for
conrmation purposes.
Service Name
: This is optional. Enter the Service name provided
that your ISP requires it, otherwise leave it blank.
MTU
: This is optional. You can specify the maximum size of the
packets transmitted to the Internet. Leave it as it is if you do not
wish to set a maximum packet size.
Maximum Idle Time
: You can specify an idle time threshold
(minutes) for the WAN port. This means if no packet has been sent
(no one using the Internet) during this specied period, the router
will automatically end the connection with your ISP.
Connection Mode
: To select the PPPoE connection mode, it
includes Keep-alive, auto-connect and manual-on.
3.4.5 PPTP (Piont-to-Piont Tunnel Protocol)
The PPTP window allows user to congure basic PPTP settings for
the router.