Asus USB-N14 User Manual

8
Connecting to a wireless network using WPS
The ASUS USB-N14 supports Wi-Fi Protected Setup (WPS) for Windows®
operating systems for securing wireless connections.
To connect the USB-N14 Wireless adapter to a WPS-enabled AP using the
WPS button:
Ensure that the AP you are trying to connect to supports the WPS
feature.
1. Enable the WPS function of the wireless AP.
2. Press both the WPS buttons on the AP and USB-N14 until the USB-N14
connects to the wireless AP to establish a secure connection.
3. If Security is enabled on the AP
or station, provide the required
password or passkey. Click OK.

Asus USB-N14 Specifications

General

Interface	WLAN
USB ports quantity	1
Connectivity technology	Wireless
Chipset	-
Internal	No
Component for	PC/Laptop
Product color	Black
Antenna connector type	R-SMA
Modulation	16-QAM, 64-QAM, CCK, OFDM
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Security algorithms	128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK, WPS
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Gain	5 dBi
Mac operating systems supported	Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64

Weight and Dimensions

Depth	90 mm
Width	55 mm
Height	11 mm