Asus VC279 Series - Page 20

3-5
Chapter 3: General Instruction
4. Image
You can adjust the image Sharpness, Aspect Control, VividPixel,
ASCR, Position, Focus, and Auto Adjust from this main function.
Color
Image
Blue Light Filter
Standard Mode VGA 1920 x 1080 @ 60Hz
Input Select
System Setup
Shortcut
Focus
Auto Adjust
Splendid Sharpness
Aspect Control
VividPixel
Position
ASCR
• Sharpness: Adjust the picture sharpness. The adjusting range
is from 0 to 100.
• Aspect Control: Adjust the aspect ratio to “Full” or “4:3”.
• 4:3 is only available when input source is in 4:3 format.
• VividPixel: ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjustingrangeisfrom0~100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Position: Adjust the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
• Focus: Reduce the Horizonal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100.
• Auto Adjust: Automatically perform Auto Adjust (only available
for VGA input).