Asus VE276Q Series - Detaching Stand for VESA Wall Mount

2-1 Chapter 2: Setup
2.1 Detaching the arm/stand
(for VESA wall mount)
ThedetachablestandoftheVE276Q/VK276QSeriesLCDmonitorisspecially
designed for VESA wall mount.
To detach the arm/stand:
1. Disconnectpowerandsignalcables.Carefullyput the front of the monitor
face down on a clean table.
2. Useascrewdrivertoremovethe two screws that secure the stand to the
monitor.
3. Detach the stand from the monitor.
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damage to the monitor.
• Holdthestandofthemonitorwhileremovingthescrews.
TheVESAwallmountkit(100x100mm)ispurchasedseparately.•
UseonlytheULListedWallMountBracketwithminimumweight/load7.9•
Kg(Screwsize:4x12mm).
Downloaded from ManualMonitor.com Manuals