Asus VG32VQ1B Series User Manual

2-2
Chapter 2: Setup
2.2 Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the monitor
facedown on its EPS packaging.
2. Remove the screws covers.
3. Remove the four (4) screws securing the arm to the rear of the
monitor.
4. Detach the stand (arm and base) from the monitor.
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load 28.8 kg
(Screw size: M4 x 10 mm).

Asus VG32VQ1B Series Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Touch Screen	no
Webcam	no
OS Compatibility	not applicable
Screen Size	31.5 inches
Panel Type	va
Aspect Ratio	16:9
Resolution	2560 x 1440
Native Resolution	2560 x 1440
Refresh Rate	120hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	1 milliseconds
Brightness	400 candela per square meter
Contrast Ratio	3000:1
Synchronization	not applicable
Horizontal Scan Rate	222 kilohertz
HDR	yes
HDR Format	hdr 10
Built-In Speakers	yes
HDMI Ports	2
Headphones Output	yes
Interface Connectors	2 x hdmi
Voice Assistant	no
Power Consumption	90 watts
Depth with Stand	9 17/100 inches
Height with Stand	17 8/25 inches
Width with Stand	28 1/10 inches
Depth without Stand	3 4/5 inches
Height without Stand	16 4/5 inches
Net Weight without Stand	12.85 pounds