Asus VS208N-P - Input Select

3-3
Chapter 3: General Instruction
3. Image
You can adjust the image Sharpness, Aspect Control, Position (VGA
only), and Focus (VGA only) from this main function.
VS208
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup
Sharpness
Aspect Control
ASCR
Position
40
Full
OFF
Focus
• Sharpness: Asjust the picture sharpness. The adjusting range
is from 0 to 100. (Only available for selecting “Standard Mode” in
Splendid menu.)
• Aspect Control: Adjust the aspect ratio to “Full”, “4:3”.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function. (ASCR: ASUS Smart Contrast Ratio. Disabled at
“Standard Mode”.)
• Position: Adjust the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100. (Only available for VGA input.)
• Focus: Reduce Horizonal-line noise and Vertical-line noise of
the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100. (Only available for VGA input.)
4. Input Select
Select the input source from VGA, DVI.
VS208
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup
VGA
DVI
• DVI: Available for model VS208NR/N-P only.