1-2
Chapter 1: Product Introduction
1.3 Assembling the monitor base
To assemble the monitor base:
1. Attach the base to the arm and fix with the screw to join them tightly.
You can easily tighten the screw by fingers.
2. Adjust the monitor to the angle that is most comfortable for you.
We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
1
2
Make sure to screw the base to the arm tightly.
1.4 Connecting cables
To connect cables:
Connect the cables you need based on chapter 1.5.2, page1-5.
To Next Page
Loading...
