EasyManua.ls Logo

Asus WS C246M PRO - 10. System Panel Connector (20-1 pin PANEL1)

Asus WS C246M PRO
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-22
Chapter 1: Product Introduction
Chapter 1
• SystempowerLED(3-pinPLED)
This3-pinconnectorisforthesystempowerLED.ConnectthechassispowerLED
cabletothisconnector.ThesystempowerLEDlightsupwhenyouturnonthesystem
power,andblinkswhenthesystemisinsleepmode.
• MessageLED(2-pinMLED)
This2-pinconnectorisforthemessageLEDcablethatconnectstothefrontmessage
LED.ThemessageLEDiscontrolledbytheBMCtoindicateanabnormalevent
occurrence.
• Systemwarningspeaker(4-pinSPEAKER)
This4-pinconnectorisforthechassis-mountedsystemwarningspeaker.Thespeaker
allowsyoutohearsystembeepsandwarnings.
• HarddiskdriveactivityLED(2-pin+HDLED)
This2-pinconnectorisfortheHDDActivityLED.ConnecttheHDDActivityLEDcable
tothisconnector.TheLEDlightsuporasheswhendataisreadfromorwrittentothe
HDD.
• Powerbutton/soft-offbutton(2-pinPWRSW)
Thisconnectorisforthesystempowerbutton.Pressingthepowerbuttonturns
thesystemonorputsthesysteminsleeporsoft-offmodedependingontheBIOS
settings.PressingthepowerswitchformorethanfoursecondswhilethesystemisON
turnsthesystemOFF.
• Resetbutton(2-pinRESET)
This2-pinconnectorisforthechassis-mountedresetbuttonforsystemrebootwithout
turningoffthesystempower.
10. System panel connector (20-1 pin PANEL1)
Thisconnectorsupportsseveralchassis-mountedfunctions.

Table of Contents

Related product manuals