Asus X99-E Series - APM Configuration

3-24
Chapter 3: BIOS Setup
Chapter 3
RGB LED lighting
[On] LEDs will always light up at the S0(Working), S3(Sleep), and S5(Soft off)
states, but not at the S5 state when the “ErP Ready” is enabled.
[Off] LEDs will not light up.
RGB LED lighting effects
This item allows you to set the RGB LED lighting effects.
Conguration options: [Default] [Auto] [Static] [Breathing] [Strobing] [Color Cycle]
The following item appears only when you set the RGB LED lighting effects to [Static],
[Breathing], or [Strobing].
RGB LED lighting color
This item allows you to set the RGB LED lighting colors.
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers.
Conguration options: [Disabled] [Enabled]
3.6.8 APM Configuration
ErP Ready
This item allows you to switch off some power at S4/S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options are switched off.
Conguration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)]