To Next PageTo Next Page
Need help?Do you have a question about the ASV RC-60 and is the answer not in the manual?
General| Brand | ASV |
|---|---|
| Model | RC-60 |
| Category | Compact Loader |
| Language | English |
Details warranty duration for loaders, rental machines, batteries, parts, engine, and tracks.
Lists conditions that will void the ASV warranty, such as improper maintenance, misuse, or unauthorized repair.
Explains the location of the machine's Product Identification Number (PIN) and its importance for service and warranty.
Emphasizes operator must be in seat with lap bar lowered and wear seat belt for operation.
Warns to keep clear of the lift arm area when it is raised and resting on stops.
Instructs to keep body inside the operator station and not extend limbs beyond it during operation.
Discusses fire hazards from high temperatures and flammable debris, advising regular cleaning.
Advises inspecting and cleaning the radiator/oil cooler to prevent engine and hydraulic system overheating.
Provides a 3-point contact safety procedure for mounting and dismounting the machine.
Warns against going under unsecured lift arms and outlines the procedure for securing them.
Warns against using ether starting aids and advises stopping engine before refueling.
Lists essential pre-operation checks including track tension, fluid levels, belts, hoses, fittings, and controls.
Details the procedure for engaging and disengaging the lift arm brace when lift arms are left in the 'up' position.
Details the step-by-step procedure for starting the engine, including pre-heating and warm-up.
Warns that two people must perform the lift arm brace procedure and never place body under unsecured lift arms.
Warns against entering or exiting the vehicle under raised lift arms and never being under unsecured lift arms.
Details the procedure and interval for changing engine oil and filter, including specifications.
Details the procedure and interval for changing hydraulic fluid and filter, emphasizing cleanliness.
Details the procedure for adjusting track tension by loosening a jam nut and turning the tensioner.
Warns to ensure the machine is off, key removed, and battery disconnected before replacing rollers.
Illustrates and lists the locations of grease fittings on the left side of the machine for daily lubrication.
