2.3
Wait for the system to boot up (this can take a minute or so) and you should be presented
with the startup login screen which indicated that the system has correctly booted up and
the temperature sensor on the top right hand side of the screen is reading approximately
room temperature or the temperature that the unit has been stored at.
2.2
Switch on the power switch.
Logging in to the system
3
When pressing a text input eld on the touch screen, an on-screen keyboard will appear,
see Figure 2. To log in, use this keyboard to enter your username and password in the
relevant elds, accept the eld as input, then press the ‘Log in’ button.
Two types of user accounts exist, ‘User’ and ‘Admin’, and you can log in as either from the
login screen. If you log in as an Admin, you will have access to certain system settings,
which a normal User account is not able to view. For the purposes of this document, it
does not matter which user type you log in as. Please consult the manual for the default
usernames/passwords.
Figure 2 An onscreen keyboard appears when entering text
3.1
8 9
To Next Page
Loading...
Need help?
General