EN 33
MALFUNCTIONS
Clicking sounds can be heard when the oven is working, particularly in the defrost setting.
• This is normal.
The circuit breaker switches off regularly.
• Consult a service technician.
The display gives an error code, ERROR XX ...
(XX indicates the number of the error).
• There is a fault in the electronic module. Disconnect the appliance from the power supply for
a few minutes. Then reconnect it and set the current time.
• Consult a service technician if the error persists.
Storing and repairing the oven
• Repairs should only be performed by a qualified service technician. If maintenance is
required, take the plug from the socket and contact the ATAG customer service.
Have the following information to hand when you call:
• The model number and serial number (stated on the inside of the oven door)
• Guarantee details
• A clear description of the problem
Choose a clean, dry place if you have to store the oven temporarily, as dust and moisture
can damage the appliance.
To Next Page
Loading...
Need help?
General
