Atag CX14411A - Postponing the Cooking Time

EN 31
POSTPONING THE COOKING TIME
Set the end time (the time when the oven should switch o) and a cooking time.
Example: Setting a cooking time (2hours) and an end time (18:00hours).
Example with the hot air setting: Current time: 12:00hours
Cooking time: 2hours
End time: You want the cooking to end at 18:00hours
Select the desired setting and function
(and set the temperature if desired)�
Press the timer button� Set the desired
cooking time using the settings
buttons (2hours)� The cooking time
symbol lights up in the display.
Press the timer button for 3seconds�
 The cooking time is added to
the current time and ‘14:00’ is
displayed� The end time symbol
lights up.
Set the desired end time (18:00) using
the settings buttons� Wait 5seconds
until the end time has been set�
Press START to start cooking�
 The display shows a figure which
indicates that the postpone
function has been activated�
 The oven starts automatically
at the set time (16:00) and the
cooking time is shown�
Note
•
The cooking time and the end time can be changed before the set times elapse�
•
Once the set time has expired, you will hear 4 beeps� ‘0:00’ flashes on the display and the
oven switches o automatically�
WARNING
Do not leave the dish too long in the oven; it could spoil�
1 2
3 4