EN 20
Rapid heating function
This function enables the required power level to be reached more
quickly, although it remains active for a very limited period of time.
• Starting from “0” position, turn the knob anticlockwise until it clicks
and hold it in that position for 2 seconds; the display will light up
showing the adjacent symbol A.
• You will then have 10 seconds to turn the knob to the required
power level.
• The display will start flashing alternating the symbol with the new
power level set with the knob.
Setting The cooking zone switches off automatically after:
1 48
2 144
3 230
4 312
5 408
6 120
7 168
8 216
9 -
Food warming function
• This function warms the bottom of a pan suitable for induction
cooking, maintaining a constant temperature (*) inside the pan.
• It is useful for keeping previously cooked food warm inside the pan,
thus optimising energy consumption.
• The maximum time for constant warming is limited to 120 minutes.
• Turn the knob clockwise to position 42 °, 70 ° or 94 °.
• The corresponding display shows the adjacent symbol in three
phases (heating power is automatically adjusted).
▷ Phase 1 (1 dash): 42° C
▷ Phase 2 (2 dashes): 70° C
▷ Phase 3 (3 dashes): 94° C
OPERATING THE INDUCTION HOB
To Next Page
Loading...