Atag HI6071F - Page 94

GB 11
Memory Cooking
The memory cooking function enables you to record and run a
cooking programme for each zone separately. When you record
a programme the settings you select will be stored automatically.
A programme may last a maximum of 4 hours.
Recording a programme
- Put a pan with contents on a cooking zone.
- Press the memory button “M” until the "record” light starts
flashing.
- Switch the appropriate zone on to the required power level.
The “record” light will be on continually.
After a few seconds the display will alternately show the
selected setting and ”rE”. The cooking times and settings will
be stored automatically during the cooking process.
- While you are cooking, the setting can be adjusted using the
+/- button.
- At the end of the cooking process press the on/off button or
the Memory button to stop recording the cooking
programme.
Running a programme
- Put a pan with contents on the appropriate cooking zone.
- Press the memory button “M” until the "play” light starts
flashing.
- Switch the zone on using the on/off button.
The “play” light will be on continually.
After a few seconds the display will alternately show the
selected setting and ”rPL”.
- The programme will run automatically according to the
recorded cooking times and settings.
- Press the on/off button to stop the programme.
CONTROLS
setting the controls