How to fix fault code FAN on my Atag Hob?
If you see fault code FAN on your Atag Hob, it indicates that the air circulation is not good. Make sure that the ventilation openings below the hob are open.
Why is my Atag Hob not working and the display is blank?
If the hob is not working and nothing appears on the display, it could be due to a lack of power supply caused by a defective cable or faulty connection. Check the fuses or the electrical switch if there is no plug.
What to do if a fuse blows when I switch on my Atag Hob?
If a fuse blows as soon as the Atag hob is switched on, it's likely that the hob has been wrongly connected. You should check the electrical connections.
How to fix fault code F00 on my Atag HI6271SV?
If fault code F00 appears, and the red lamp next to the child lock button is illuminated while the lamp above the pause button is flashing on your Atag hob, it means the control panel is dirty or has water on it. Clean the control panel to resolve this issue.
What does fault code F8 mean on my Atag Hob?
If fault code F8 or F08 appears, and the red lamp next to the child lock button is illuminated while the lamp above the pause button is flashing on your Atag hob, the appliance has overheated. Allow the appliance to cool down before you start cooking again.
What does fault code F99 mean on my Atag Hob?
If fault code F99 appears, and the red lamp next to the child lock button is illuminated while the lamp above the pause button is flashing on your Atag hob, it indicates that you have operated 2 or more buttons at the same time. Avoid pressing multiple buttons simultaneously.
What does 'BR' on my Atag HI6271SV Hob display mean?
If 'BR' appears in the display of your Atag Hob and the operation does not react, the bridge function is likely switched on. You should switch the bridge function off.
Why did my Atag Hob cooking zone suddenly stop?
If a cooking zone suddenly stops working and you hear a signal on your Atag hob, it means the preset time has ended. You can switch the signal off by pressing the - or + key of the timer.
What does fault code F7 mean on my Atag Hob?
If you are getting fault code F7 on your Atag hob, the ambient temperature is not good. Switch off all heat sources close to the hob.
What does fault code F9 mean on my Atag HI6271SV?
If you see fault code F9 and/or hear a continuous audible signal from your Atag hob, it indicates that the voltage is too high and/or not connected properly. Have your connection changed.
General| Type | Induction Hob |
|---|---|
| Number of Cooking Zones | 4 |
| Control Type | Touch |
| Power Levels | 9 |
| Installation Type | Built-in |
| Total Power | 7.4 kW |
| Boost Function | Yes |
| Residual Heat Indicator | Yes |
| Child Lock | Yes |
| Timer | Yes |
| Automatic Pan Detection | Yes |
| Color | Black |
| Dimensions (W x D) | 59 cm x 52 cm |
| Width | 590 mm |
| Power per Zone | 1800-3700 W |
| Material | Glass |
To Next Page
