Why is my Atag Hob not working and the display is blank?
If your Atag Hob isn't working and the display is blank, it's likely due to a power supply issue. Check the fuses or the electric switch to ensure a proper connection.
What to do if an Atag Hob cooking zone suddenly stops and there is a signal?
If a cooking zone on your Atag Hob suddenly stops working and you hear a signal, the timer may have ended. Touch the left or right timer key to stop the alarm.
How to fix error code ER 03 and continuous beep on Atag HIDD8472EV?
The error code ER 03 and a continuous beep on your Atag Hob indicates that you've either pressed two or more keys simultaneously or the control panel is dirty or wet. Here's what to do: * Do not operate more than one key at the same time. * Clean the control panel.
What to do if a fuse blows when switching on my Atag HIDD8472EV?
If a fuse blows as soon as you switch on your Atag Hob, it means the hob has been wrongly connected. In this case, contact a professional installer to correctly connect the hob.
Why does my Atag HIDD8472EV display 'u' when I switch on a cooking zone?
If your Atag Hob display shows 'u' when you switch on a cooking zone, the pan you are using is either unsuitable for induction cooking or has too small a diameter. Use a suitable pan.
How to resolve error code E8 on Atag HIDD8472EV Hob?
Error code E8 on your Atag Hob indicates a malfunction of the extractor unit, potentially due to a blockage. Remove any blockages and clean the extractor unit.
What does error code ER21 mean on my Atag HIDD8472EV and how to fix it?
Error code ER21 on your Atag Hob indicates overheating. Let the hob cool down.
What does error code E2 mean on an Atag Hob?
Error code E2 indicates excess temperature of the induction element. This can happen if empty cookware has been used. To prevent this, do not heat empty cookware.
What does error code E3 mean on my Atag Hob?
Error code E3 on your Atag Hob means you are using the wrong pan. Use appropriate pans.
To Next Page
General
