Atag HIDD8472EV - Boost; Manually Switch on the Extractor Unit

EN 23
OPERATION OF THE EXTRACTOR UNIT
Manually switch on the extractor unit
1. Switch on the hob.
2. Touch the extraction key.
▷ The display of the extractor unit lights up.
3. Set the extractor speed level within 3 seconds by touching the slide control (1 to 9).
▷ The extractor unit switches on with the extraction speed that is set.
▷ Set a higher or lower level with the slide control.
Boost
1. Switch on the hob and set a power level (>2).
2. Touch the ‘Automatic extraction mode’ key to switch off the automatic extraction mode.
3. Touch the extraction key.
▷ The display of the extractor unit lights up.
4. Touch level 9 to select ‘Boost’.
▷ The extractor unit switches on at speed level 9.
▷ ‘9’ shows on the display.