EasyManua.ls Logo

Atag HIDD7472EV - User Manual

Atag HIDD7472EV
144 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Gebruiksaanwijzing
Inductiekookplaat met afzuigunit
Instructions for use
Induction hob with extractor
HIDD7472EV

Table of Contents

Questions and Answers

  • J
    James SmithAug 14, 2025
    What to do if my Atag HIDD7472EV Hob is not working and nothing appears on the display?
    • N
      Nicholas LiAug 14, 2025
      If your Atag Hob isn't working and the display is blank, it's likely due to a power supply issue. Check the fuses or the electrical switch to ensure they are functioning correctly. This could be due to a defective cable or a faulty connection.
  • P
    parrishmichaelAug 17, 2025
    Why does my Atag Hob show error code ER 03 and continuous beep?
    • G
      gregory67Aug 17, 2025
      The error code ER 03 and continuous beep on your Atag Hob indicates that you've either pressed two or more keys simultaneously, or the control panel is dirty or has water on it. Avoid pressing multiple keys at once. Clean the control panel to resolve this issue.
  • J
    jsmithAug 21, 2025
    What does error code E2 mean on my Atag HIDD7472EV Hob?
    • J
      Jessica CampbellAug 21, 2025
      Error code E2 on your Atag Hob indicates an excess temperature of the induction element, which can occur if empty cookware has been used. To prevent this, do not heat empty cookware on the hob.
  • T
    Troy Cobb IIAug 25, 2025
    What does error code E8 mean on Atag Hob?
    • N
      Nancy RyanAug 25, 2025
      Error code E8 on your Atag Hob indicates a malfunction of the extractor unit, potentially due to a blockage. Remove any blockages and clean the extractor unit.
  • T
    Troy FloydAug 28, 2025
    What does error code ER21 mean on my Atag Hob?
    • P
      Philip SteinAug 28, 2025
      Error code ER21 on your Atag Hob indicates overheating. Allow the hob to cool down.
  • M
    Matthew FoxAug 31, 2025
    What does error code E3 mean on my Atag Hob?
    • J
      Joe JonesAug 31, 2025
      Error code E3 on your Atag Hob means you are using the wrong pan. Use appropriate pans.
  • D
    Donna CarterSep 3, 2025
    Why did a fuse blow as soon as I switched on my Atag HIDD7472EV Hob?
    • D
      Donald BarreraSep 3, 2025
      The hob has been wrongly connected. Contact a professional installer.
  • D
    Daniel Banks DVMSep 6, 2025
    Why does my Atag HIDD7472EV cooking zone suddenly stop working and I hear a signal?
    • R
      Robert AcostaSep 7, 2025
      If a cooking zone on your Atag Hob suddenly stops working and you hear a signal, it means the timer has ended. Touch the left or right timer key to stop the alarm.
  • B
    Bianca DixonSep 10, 2025
    How to fix 'u' appearing on my Atag HIDD7472EV display when I switch on a cooking zone?
    • A
      Abigail MendozaSep 10, 2025
      If the display of your Atag Hob shows 'u' when you switch on a cooking zone, it indicates that the pan you're using isn't suitable for induction cooking, or its diameter is too small. Use a suitable pan.

Atag HIDD7472EV Specifications

General IconGeneral
TypeInduction Hob
Number of Cooking Zones4
Width74 cm
Control TypeTouch
Power Levels9
ColourBlack
Total Power7.4 kW
Boost FunctionYes
Safety FeaturesChild lock

Related product manuals