Atag HIDD7472EV/A01 - User Manual

Questions and Answers

O
omirandaAug 15, 2025
What to do if my Atag HIDD7472EV/A01 is not working and nothing appears on the display?
- M
  millsanthonyAug 15, 2025
  If your Atag Hob isn't working and the display is blank, it's likely due to a power supply issue. Check the fuses or the electrical switch to ensure they are functioning correctly. This could be due to a defective cable or a faulty connection.
R
Roy FosterAug 18, 2025
Why does my Atag Hob show error code ER 03 and continuous beep?
- P
  Philip WebbAug 18, 2025
  The error code ER 03 and continuous beep on your Atag Hob indicates that you've either pressed two or more keys simultaneously, or the control panel is dirty or has water on it. Avoid pressing multiple keys at once. Clean the control panel to resolve this issue.
S
Sean ClementsAug 22, 2025
What does error code E2 mean on my Atag HIDD7472EV/A01 Hob?
- J
  Jose SmithAug 22, 2025
  Error code E2 on your Atag Hob indicates an excess temperature of the induction element, which can occur if empty cookware has been used. To prevent this, do not heat empty cookware on the hob.
X
xjohnsAug 25, 2025
What does error code E8 mean on Atag HIDD7472EV/A01?
- S
  Samuel CurryAug 26, 2025
  Error code E8 on your Atag Hob indicates a malfunction of the extractor unit, potentially due to a blockage. Remove any blockages and clean the extractor unit.
H
Holly LloydAug 28, 2025
What does error code ER21 mean on my Atag HIDD7472EV/A01?
- B
  Brittney BernardAug 29, 2025
  Error code ER21 on your Atag Hob indicates overheating. Allow the hob to cool down.
A
Anna BrownSep 1, 2025
What does error code E3 mean on my Atag Hob?
- L
  Lisa PhillipsSep 1, 2025
  Error code E3 on your Atag Hob means you are using the wrong pan. Use appropriate pans.
D
Danny ColemanSep 4, 2025
Why did a fuse blow as soon as I switched on my Atag Hob?
- J
  joneschristianSep 4, 2025
  The hob has been wrongly connected. Contact a professional installer.
S
Steven GillespieSep 7, 2025
Why does my Atag HIDD7472EV/A01 cooking zone suddenly stop working and I hear a signal?
- I
  Isaiah BushSep 8, 2025
  If a cooking zone on your Atag Hob suddenly stops working and you hear a signal, it means the timer has ended. Touch the left or right timer key to stop the alarm.
A
Alice LamSep 12, 2025
How to fix 'u' appearing on my Atag HIDD7472EV/A01 display when I switch on a cooking zone?
- E
  Evan CantrellSep 12, 2025
  If the display of your Atag Hob shows 'u' when you switch on a cooking zone, it indicates that the pan you're using isn't suitable for induction cooking, or its diameter is too small. Use a suitable pan.