Why is my Atag HIDD28471SV Hob not working and the display is blank?
If your Atag hob isn't working and the display is blank, check the fuses, the electric cable, and the switch if there is no plug.
What to do if Atag Hob cooking zone suddenly stops and I hear a signal?
If a cooking zone on your Atag hob suddenly stops working and you hear a signal, it means the preset time has ended. Turn off the signal by pressing the - or + key on the timer.
Why does my Atag Hob display keep flashing after switching a cooking zone on?
If the display keeps flashing after switching a cooking zone on your Atag hob, the pan you are using is either unsuitable for induction cooking or has a diameter of less than 12 cm. Use a suitable pan.
How to clean circle on Atag HIDD28471SV Hob after cooking?
If a circle of the pan bottom remains visible on your Atag hob after cleaning, it is because a contaminated pan bottom was used on the cooking zone. Clean the induction hob with a ceramic hob cleaner and remove the dirt/grease from the pan bottom.
General| Number of Cooking Zones | 4 |
|---|---|
| Control Type | Touch |
| Power Levels | 9 |
| Colour | Black |
| Boost Function | Yes |
| Installation Type | Built-in |
| Type | Induction |
| Width | 780 mm |
| Safety Features | Child lock |
| Total Power | 7.4 kW |
Important warnings and precautions for safe operation and handling.
Safety advice related to hob guards, tins, worktops, and temperature limits.
Procedures for cracked glass and safety for children/special needs users.
Safety tips for induction cooking and keeping items away from magnetic fields.
Warnings about air extraction, ventilation, and electric shock risks.
Risks of fire from grease deposits and overheated fat, and prevention methods.
Common issues, causes, solutions, and advice for cracked glass.
Troubleshooting specific errors for induction zones and the extraction module.
Explanations of error codes and troubleshooting Wi-Fi problems.
Essential safety guidelines and electrical connection standards for installation.
Cut-out specifications, appliance dimensions, and cabinet requirements.
Diagrams for electrical connection and setting the current limiter parameter.
Details on connecting the unit to exhaust, recirculation, or plasma filter systems.
Steps for installing the appliance and applying sealing gaskets.
To Next Page
