EN 19
OPERATION OF THE HOB
Using the cooking timer
The cooking timer is connected to a cooking zone. After the set time has elapsed, the
cooking zone will switch off automatically.
The hob is switched on and for at least one cooking zone a power level has been set.
1. Touch the desired cooking zone key.
2. Touch the timer display.
▷ The timer symbol of the active cooking timer lights up brightly.
3. Use the ‘+’ or ‘-’ key to set the desired time (from 1 minute to 9 hours and 59 minutes).
▷ The left position of the timer display shows the hours, the other positions the minutes.
▷ When the time is set, it will begin to countdown and the timer symbol flashes slowly.
▷ The timer display will show the remaining time.
▷ The last 10 minutes will be displayed in minutes and seconds.
▷ The selected cooking zone will switch off automatically once the set time has elapsed.
▷ The timer flashes and the alarm beeps after the set time has passed.
4. Touch the timer display to stop the alarm.
▷ The alarm stops automatically after 2 minutes.
All the cooking zones can have a cooking timer that has been set. The display will always
show the time of the cooking zone with the shortest time remaining.
Changing the pre-set cooking time
The cooking time can be changed anytime during the operation.
1. Touch the relevant cooking zone key.
2. Touch the timer display.
3. Use the ‘+’ or ‘-’ key to change the time.
To Next Page
Loading...
Need help?
General
