how to use your oven
using the memory feature
For starting off a memorized cooking program:
-Press on M1 or M2.
- Cooking starts immediately.
- To stop cooking during the program, press on the START/STOP
control.
NOTE : Putting your favourite cooking programs into memory can be
repeated as often as you want.
how to use your oven
setting the display to stand-by mode
how to use your oven
using the child safety feature
To reduce your oven's power consumption to a minimum when it is not
in use, you can put your readout system in STANDBY MODE.
To carry out this operation, proceed as follows:
GOING INTO STANDBY MODE:
- Your oven must be in normal time readout mode.
- Press both the + and - controls for five seconds at the
same time.
- The display reads "Lcd off".
- Take your fingers off the two controls.
- 30 seconds later your readout will switch off.
Your oven is now in standby mode; whenever you are in the normal time
readout mode, it will turn off automatically after 30 seconds.
COMING O
UT OF STANDBY MODE:
- Your oven must be in the normal time readout mode.
- Press the + and - controls for five seconds at the
same time.
- The display will then read "Lcd on".
- Take your fingers off the two controls.
- You are now out of the STANDBY MODE; the readout is now perma-
nently lit.
In order to prevent your oven being turned on unintentionally, you may
lock the controls.
To do this:
- Press on the START/STOP touch control until it bleeps.
Keep pressing on the touch control until the bleep stops and a key
appears on the indicator panel.
-To unlock the controls, repeat the operation.
-Press the START/STOP touch control until you hear a long bleep.
Keep your finger on the touch control until the bleep stops and
the key disappears from the display panel.
NOTE: Only the "separate timer" program remains operational.
(key)
GB 10
To Next Page
Loading...
Need help?
General
