EN 20
ERROR AND SAFETY CODES
Code General Function Solution
E-
**
1)
-SE-
An error of the oven may cause
low performance and problems
in safety. Stop using the oven
immediately.
Call local ATAG customer service.
S-01
SAFETY SHUTOFF
Oven has continued operating at set
temperature for prolonged time.
Turn the oven off and remove food.
Allow the oven to cool down before
using again.
- - - -
If you did not select an appropriate
temperature for the mode.
Select the correct temperature
for the mode (see section “Using the
Fast Preheating mode”, page 13)
1) * refers to all numbers or characters.
To Next Page
Loading...
