Atag OX6411B - Setting the Clock; Child Safety Function

EN 12
Setting the Clock
When the power is first supplied to the oven, the display on the control
panel will light briefly. After 3 seconds, you will see ‘12:00’ in the
display.
1
Press the Time Select Knob,
the hour fi gures blink.
2
Turn the Time Select Knob, set
the desired time in hours.
3
Press the Time Select Knob,
the minute fi gures blink.
4
Turn the Time Select Knob, set
the desired time in minutes.
5
Press the Time Select Knob to
confi rm.
Child Safety Function
You can use the ‘child lock function’ in standby status.
1
Press the Time Select Knob,
hold for 3 seconds. (L) will
appear in the display.
SETTINGS