EasyManua.ls Logo

Atag OX9011M - Bringing the Oven into Operation before You Start Cooking; Switching on

Atag OX9011M
45 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB 6 GB 7
bringing the oven into operation
before you start cooking
cleaning the oven and accessories
Remove the accessories from the oven and clean the oven
with a mild cleaning agent.
Switch the oven on for an hour at 250 °C (see page 7).
Protective greases used during manufacture will then be
removed.
Remark: When your oven is heated strongly for the first
time, it will have a 'new' smell. This is normal. Switch the
extractor hood on if necessary.
After the oven has cooled down, clean it with warm water.
operation
switching on
switching on
functions
1 Select an oven function.
temperature
2 Set the temperature required.
cooking time
3 Set the cooking time.
The indicator lights above the knobs light up.
If you do not wish to set a cooking time, you turn the knob
to .
switching off
1 Turn the knobs to .
The indicator lights go out.
attention!
The oven will only function if the timer is set to , or if a
time has been set (the indicator lights are then on).
selecting function
setting the
temperature
setting the time
225
45

Related product manuals