EN 19
INSTALLATION
Building in
1. Place the oven in the cabinet and make sure the lead does not get
squeezed or come into contact with oven components that become
hot.
2. Secure the oven using the screws on the front of the oven. The
screw holes are behind the oven door.
3. Make sure that the oven walls do not come into contact with the
walls of the cabinet. Keep a minimum space of 2 mm between oven
and cabinet.
Technical data
The connection value (W), the required voltage (V) and the frequency
(Hz) are on the appliance’s identification card.
This appliance complies with all relevant EU directives.
To Next Page
Loading...
