If a fault is detected the boiler will be blocked. This
will be reflected, by an alternate display of
with an
E
of Error or a BL of Blocking and a
code.
You can try to reset the boiler by pressing
Reset key once. If the problem remains
contact your installer and inform them about
fault and give them the number code.
If you discover any leaks from the boiler contact
your installer.
We advise you to obtain a service contract
your installer for regular maintance
adjustment to keep your boiler safe and in
condition.
The casing of the boiler consists of metal and
plastic parts which can be cleaned with a
non abrasive cleaning agent.
You can find the warranty conditions in the
warranty card which is supplied with the boiler.
Error, maintenance and warranty
To Next Page
Loading...
Need help?
General
